Scotchman circular cold saws produce high quality cuts and maximize your cutting capacity. Our cold saws are designed to cut larger volume for the same size blade. This is achieved by placing the material to be cut underneath the blade instead of in front of it. Scotchman cold saws utilize a double clamping system to best position material for the cleanest burr-free cuts, eliminating the cost of secondary operations.

These cold saws from Scotchman Industries use a 14" blade and are our recommendation for sawing up to 4 7/8" tube or thick wall pipe. We also recommend the power down-feed model if your application requires more than 25% of your activity in this larger diameter material.

Manual Cold Saw

CPO 350

Manual clamp for material vise Operator control trigger switch

Manual Cold Saw

CPO 350 PK

Air operated clamp vise

Operator control trigger switch

Semi-Automatic Cold Saw

CPO 350 PKPD

Air operated clamp vise

Pneumatically operated power down feed Emergency stop button

Standard Equipment and Features

American made
Double self-centering vise assures burr-free cuts
Miter capabilities 135° both 90° left and 45° right
Miter locking devise stops at 45° left, straight 90° and 45° right
Double reduction gear box. Both gears are hardened and ground.

Worm wheel of top quality bronze
Slotting and longitude cutting
Material length stop 30”
One HSS blade 12-1/2” diameter (315mm)
Two cutting speeds
10 gallon coolant tank with pump
One gallon coolant
One blade wrench
Completely assembled ready for operation
Warranty: One year parts

Capabilities

Cuts ferrous and non-ferrous material
Cuts stainless steel, mild steel, aluminum, and plastic
Maximum diameter blade 14"
Maximum diameter cut 4 7/8" OD round

Maximum Capacities

Tubing	90 Degree	45 Degree
Round	4-7/8"	4-3/8"
Square	4-3/8" x 4-3/3"	4" x 4"
Rectangle	5½" x 4"	4" x 4"
Solid	90 Degree	45 Degree
Round	2"	1-3/4"
Square	2" x 2"	1-3/4" x 1-3/4"

Specifications
Cutting speeds must be specified when ordering

LT (Low Turns) designed for mild steel, stainless steel & thick wall pipe
LT 22/44 rpm
Motor Rate: Low rpm 1 hp · High rpm 2 hp
LT variable speed drive 11 to 88 rpm
Motor Rate: Low rpm 1 hp · High rpm 2 hp
HT (High Turns) designed for thin wall tube and non-ferrous material
HT 44/88 rpm
Motor Rate: Low rpm 2 hp · High rpm 2.7 hp
HT variable speed drive 22 to 176 rpm
Motor Rate: Low rpm 2 hp · High rpm 2.7 hp

Factory wired. Specify 230 3 PH, 460 3 PH or 575 volt 3 PH 60 hz
Maximum diameter blade - 14” (350mm)
Arbor bore - 1 9/16” (40mm)
Pin spacing - 4/12/64 & 2/8/55

Width - 21 7/8”
Depth - 17½”
Height - not including feed handle 56¼”
Height - from floor to vise 37 7/16”
Shipping weight - 675 lbs

For more information on the Scotchman Cold Saws call Ocean Machinery now at 1 (800) 286-3624 or complete our information request form.

Address 6720 NW 15th Way, Fort Lauderdale FL 33309 USA : Toll Free (800) 286 3624 : Tel (954) 956 3131 : Fax (954) 956 3199

AVENGER CNC Beam Drill : CLIPPER CNC Angle Line : LIBERATOR CNC Beam Coper : TERMINATOR Band Saw : ELIMINATOR Material Handling System

SCOTCHMAN COLD SAWs

Scotchman Cold Saw CPO 350 Series

scotchman circular cold saws

Manual Cold Saw

CPO 350

Manual Cold Saw

CPO 350 PK

Semi-Automatic Cold Saw

CPO 350 PKPD

Standard Equipment and Features

Capabilities

Maximum Capacities

Specifications Cutting speeds must be specified when ordering

Specifications
Cutting speeds must be specified when ordering